Benefits of plasma treatments on critical dimension control and line width roughness transfer during gate patterning

The present work focuses on the line width roughness (LWR) transfer and the critical dimension control during a typical gate stack patterning and shows the benefits of introducing 193 nm photoresist treatments before pattern transfer into the gate stack to improve process performance. The two investigated treatments (HBr plasma and vacuum ultra violet (VUV) plasma radiation) have been tested on both blanket photoresist films and resist patterns to highlight the etching and roughening mechanisms of cured resists. Both treatments reinforce the etch resistance of the photoresist exposed to fluorocarbon plasma etching process used to open the Si-ARC (silicon antireflective coating) layer. The etch resistance improvement of cured resists is attributed to both the decrease in oxygen content within the resist and the crosslinking phenomena caused by VUV radiation during the treatment. As the magnitude of the surface roughness is directly correlated to the etched thickness, cured resists, which are etched less ra...