Bistatic SAR Clutter-Ridge Matched STAP Method for Non-stationary Clutter Suppression

Clutter suppression is a challenging task in synthetic aperture radar-ground moving target indication (SAR-GMTI). In general, sufficient secondary samples are not easily acquired due to the non-stationary and non-homogeneous characteristics of bistatic SAR (BiSAR) clutter, resulting in worse clutter suppression results. Recently, space-time adaptive processing based on sparse recovery (SR-STAP) has been developed since its better clutter suppression performance with less samples. However, since the off-grid problem in space-time domain caused by BiSARs separate configuration, existing SR-STAP would suffer from severe performance degradation. To address this problem, a clutter-ridge matched STAP (CRM-STAP) method for BiSAR non-stationary clutter suppression is proposed. First, clutter distribution modeling with arbitrary BiSAR configuration is applied to accurately obtain the clutter ridge in space-time domain. Then, keystone transform and time-division processing are applied to correct range cell migration and eliminate Doppler frequency migration, respectively. Next, to solve the off-grid problem, the CRM dictionary is reconstructed via adaptive gradient method, which is established along the direction of clutter ridge and its orthogonal direction. Then, with the constructed CRM dictionary, the clutter covariance matrix (CCM) estimation process is transformed to a multi-measured vector optimization problem, and it can be directly solved by the sparse Bayesian learning algorithm. Finally, based on the estimated CCM, the CRM-STAP filter is built to suppress the non-stationary clutter effectively. Compared with the existing STAP and SR-STAP methods, this method can avoid the performance degradation in clutter suppression caused by the off-grid problem and overcomes the strong non-stationary problem of BiSAR clutter in heterogeneous environments. In October 2020, we have successfully carried out the world’s first airborne BiSAR-GMTI experiment, and the experimental results are given to verify the effectiveness of this method.