Surface passivation for Si solar cells: a combination of advanced surface cleaning and thermal atomic layer deposition of Al2O3

Thermal atomic layer deposition (ALD) of Al2O3 provides an adequate level of surface passivation for both p-type and n-type Si solar cells. To obtain the most qualitative and uniform surface passivation advanced cleaning development is required. The studied pre-deposition treatments include an HF (Si-H) or oxidizing (Si-OH) last step and finish with simple hot-air drying or more sophisticated Marangoni drying. To examine the quality and uniformity of surface passivation - after cleaning and Al2O3 deposition - carrier density imaging (CDI) and quasi-steady-state photo-conductance (QSSPC) are applied. A hydrophilic surface clean that leads to improved surface passivation level is found. Si-H starting surfaces lead to equivalent passivation quality but worse passivation uniformity. The hydrophilic surface clean is preferred because it is thermodynamically stable, enables higher and more uniform ALD growth and consequently exhibits better surface passivation uniformity.