Growth and Electrical Properties of Fe doped (Ba,Sr)TiO3 Thin Films Deposited by Pulsed Laser Deposition

Impurity effects were investigated in (Ba,Sr)TiO 3 (BST) systems in order to suppress leakage currents under relatively low oxygen pressure conditions by Pulsed Laser Deposition (PLD). We tried to dope transition metals, such as Mo, Mn, Cr, W and Fe into the BST target and used the targets to fabricate the films. By measuring electrical properties, we found Fe-doping had a significant effect on suppressing leakage current. Subsequently, we changed the amount of Fe doping from 0.1mol% to 6%. As a result, with post annealing, the sample with Fe:4% showed the lowest leakage current among those analyzed. Even without post annealing, the sample with Fe:6% showed the lowest leakage current. As for the dielectric constants, they decreased as the doping increased. At most, a 30% reduction was observed, compared with non-doped BST. XANES (X-ray Absorption Near Edge Structures) results indicated that the valency of the Fe ion was 3+ and located at the B-site of BST.