Precipitation strengthening in high manganese austenitic TWIP steels

Abstract At low strains (∊ 0.3) the work hardening rate decreased slightly. Synchrotron X-ray diffraction analysis suggested that this was due to a reduction in the kinetics of twin formation. The highest strengthening coefficient in cold strips was obtained with Ti additions ≤0.1 wt.% (+1 380 MPa/wt.% Ti) but the effect quickly saturated after an increase of ∼+150 MPa. With Nb additions only modest hardening (+187 MPa/wt.%) could be achieved. The strengthening due to V was >530 MPa/wt.% for V additions ≤ 0.4 wt.% Saturation effects are less critical with V additions and yield stress increases of +375 MPa were demonstrated.