Improved strength of boron-doped Sn-1.0Ag-0.5Cu solder joints under aging conditions
2012
Abstract The mechanical properties of new lead-free Sn–Ag–Cu solder alloys containing 0.05–0.1 wt.% boron were investigated under a range of isothermal aging and reflow conditions. The boron-doped solder joints showed higher ball pull strength than the baseline Sn-1.0Ag-0.5Cu solder joint under all isothermal aging and reflow conditions examined. In particular, the high-speed ball pull strength of the 0.05 wt.% B-doped solder joint was approximately 2.5 times greater than that of the baseline Sn-1.0Ag-0.5Cu solder joint aged at 150 °C for 200 h, which is attributed mainly to the reduced rate of grain growth in the intermetallic compound (IMC) layers of B-doped solder joints under aging conditions.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
37
References
22
Citations
NaN
KQI