Evaluation of Turbulence Measurement Techniques from a Single Doppler Lidar

Measurements of turbulence are essential to understand and quantify the transport and dispersal of heat, moisture, momentum, and trace gases within the planetary boundary layer. Through the years, various techniques to measure turbulence using Doppler lidar observations have been proposed. However, the accuracy of these measurements has rarely been validated against trusted in situ instrumentation. Herein, data from the eXperimental Planetary boundary layer Instrumentation Assessment (XPIA) are used to verify Doppler lidar turbulence profiles through comparison with sonic anemometer measurements. For 17 days at the end of the experiment, a single scanning Doppler lidar continuously cycled through different turbulence measurement strategies: velocity azimuth display, six-beam, and range height indicators with a vertical stare. Measurements of turbulence kinetic energy, turbulence intensity, and shear velocity from these techniques are compared with sonic anemometer measurements at six heights on a 300-m tower. The six-beam technique is found to generally measure turbulence kinetic energy and turbulence intensity the most accurately at all heights, showing little bias in its observations. Turbulence measurements from the velocity azimuth display method tended to biased low near the surface, as large eddies were not captured by the scan. None of the methods evaluated were able to consistently accurately measure the shear velocity. Each of the scanning strategies assessed had its own strengths and limitations that need to be considered when selecting the method used in future experiments.