Performance of GaN vertical light emitting diodes using wafer bonding process with Al-alloyed graphite substrate.

: We report on the vertical-structure light emitting diodes (VLEDs) fabricated with wafer bonding method using Al-alloyed graphite and Si supporter. VLEDs with Al-alloyed graphite produced no crack during/after laser lift-off (LLO) techniques while the wafer crack took place using Si supporter because of the difference of thermal expansion coefficients between Si and sapphire. The performance of VLEDs with wafer bonding method using Al-alloyed graphite supporter was compared to those fabricated by Cu plating methods. The output power of the chips with wafer bonding method was nearly same as the one with Cu-plating method. However, the forward voltage of VLEDs with wafer bonding method was higher than those with Cu-plating method. In the terms of reliabilities the wafer bonding process is more preferable to Cu-plating and our report proposes that Al-alloyed graphite could be one of promising candidates for the supporters in wafer bonding process.