Evaluation of efficacy of Aloe Vera as a Disinfectant by Immersion and Spray methods on Irreversible Hydrocolloid Impression Material and its Effect on the Dimensional Stability of Resultant Gypsum Cast - An in Vitro Study.

: The need to use a natural alternative for disinfecting dental impression materials, which should be biocompatible and effective, led us to evaluate the efficacy of Aloe vera as a disinfectant by immersion and spray method on alginate impression material and its effect on the dimensional stability of the resultant gypsum cast. The efficacy of the disinfection procedures against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans was evaluated by determining the number of colony-forming units (CFU) recovered after disinfection of alginate discs inoculated with 1x106 CFU for defined intervals with aloe vera solution (99.96%). Dimensional stability was determined from the mean percentage deviation of three measurements that were taken between the fixed points on the casts using a traveling microscope and compared with corresponding measurements from the master model and controls. Statistical analysis of data was determined by analysis of variance. We found out that there is a mean percentage reduction in colony count of S. aureus, P. aeruginosa, and C. albicans after 3 minutes of immersion in aloe vera and after 3 minutes spray disinfection. Complete elimination of all the microorganism cells after 7 min immersion and spray disinfection. There was a statistically significant difference in the increase of the mean anteroposterior (AP) and cross arch (CA) dimension after 3 and 7 minutes immersion in aloe vera. Spraying with aloe vera for 7 minutes was proved to be the most effective disinfection procedure without altering dimensional stability.