Duplex plasma treatment of AISI D2 tool steel by combining plasma nitriding (with and without white layer) and post-oxidation
2020
Abstract AISI D2 tool steels are widely applicable in dies or tools manufacturing. Unfortunately, their use is drastically reduced due to short lifetime. Plasma nitriding without formation of white layer is an effective technique to improve the lifetime of tool steel by improving tribological features. Usually, white layer formation is unavoidable, thus its detrimental effects (its brittle nature causes severe abrasive wear) must be removed or reduced by some alternative treatment. Here, in this study, we attempted to investigate the effect of post-oxidation of nitrided tool steel with and without presence of white layer on its wear performance and its dynamic mechanical response. The micro-hardness and nano-hardness are enhanced by plasma nitriding, but a slight decrease with post-oxidation treatment. The post-oxidized samples show the formation of hematite and magnetite phases, which changes the wear mechanism of nitrided samples from abrasive to adhesive wear. This study suggests that the removal or avoidance of white layer formation is not compulsory, and its unfavorable effects on tribological performance of tool steel can be escaped by post-oxidation for a short time of 1 h. Analysis of contact stiffness and storage and loss moduli shows that the post-oxidation can result in surfaces less prone to cracking under cyclic loads. Duplex treatment by combining plasma nitriding and plasma oxidation is carried out in the same processing reactor by changing processing gasses admixture, thus it is favorable and economical for large scale industrial applications.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
47
References
6
Citations
NaN
KQI