Characterisation of PTA processed overlays without and with WC nanoparticles
2017
ABSTRACTMixtures of Ni-based filler metal without and with 0.5, 1, and 2% WC nanoparticles (NPs) were methodologically tested in order to improve the wear behaviour of WC/Ni-based overlays deposited on low carbon steel by the plasma transferred arc (PTA) process. On adding 2% WC NPs, the longitudinal direction overlay microstructure was modified to have a fibrous appearance. The mechanism to improve WC particle distribution and thus prevent microcrack propagation in the overlays implies a liquid-phase viscosity change. Results of pin-on-disk tests in the overlay using filler metal with 2% WC NPs show that the combined effect of fibrous microstructure and W-rich phases in the overlay, decreases the volume loss by 76% and 78% in comparison with overlays without WC NPs for a 1 and 5 N load, respectively. These outcomes might be of interest for the mining industry, where machinery and equipment are exposed to extreme wear conditions.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
30
References
9
Citations
NaN
KQI