CONSTRUCTAL TREE-SHAPED WATER DISTRIBUTION NETWORKS BY AN ENVIRONMENTAL APPROACH

Flow systems most often present thermal, mechanical and chemical losses due to irreversibility during the fl owing fl uid transport. These losses strongly impact both their energy performances and the fl owing fl uid quality. In this paper, two effective, drinking water and irrigation, tree-shaped networks (from the fl uid quality and energy performance points of view) are constructed by using the constructal approach coupled with the exergy destruction minimization method. It is shown that in the construction of tree-shaped network for water distribution, the method of exergy destruction minimization is equivalent to minimizing mechanical irreversibility (this is equivalent to pumping power) under a water quality constraint. For both phenomena occurring in the network (energy consumption and the fl uid quality degradation), this study offers new interesting routes for optimizing the system either by the exergy destruction minimization (in that case, both irreversible processes are taken into account in the design procedure) or by minimizing one of the two irreversible processes, the other being taken into account as the design constraint. The originality of the method relies on the introduction of the environmental protection through the control of the fl owing fl uid quality. This paper shows that, for the performance improvement of a water distribution network, it is important to focus on the design of the network rather than enhancing only the transport properties. Note fi nally that the focus on the quality in flsystems is a crucial approach in environmental engineering such as drinking water distribution systems or chemical fl uids transfer systems. The approach presented in this paper should be seen as an introduction to reactive fl ow systems designing by constructal approach.