The surface area modulation downhole telemetry system for measurement while drilling

The need for a reliable, fast, wireless telemetry system in the drilling industry is great but the technical challenge to develop such a system is huge. A downhole wireless telemetry system based on Surface Area Modulation (SAM) has been developed which involves the introduction of an electrically insulated gap near the bottom of an otherwise conductive drillstring. The electrical resistance of this gap can be modulated to alter the electrical characteristics of a circuit involving a surface power supply, the sections of the drillstring above and below the gap, the earth, and a nearby return electrode. These changes alter the current in the circuit, which can be monitored at the surface with an ammeter. Downhole data are encoded and transmitted to the surface as a pattern of current oscillations. In a field test, the SAM system successfully transmitted downhole information from depths of 1,400 ft below the fluid level to the surface at a rate of 110 baud. Electrical insulation on the outside of the simulated drillstring was required to achieve this level of performance. Electrically insulated tubing improved the data transmission rate at a given depth by more than an order of magnitude, and increased the maximum depth frommore » which successful data telemetry could be achieved by more than a factor of two.« less