Improvement of luminescent stability from carbon nanotube field emission display based on printed CNT film

2006 
Aiming at the influences of poor contact at carbon nanotube (CNT)/electrode interface on luminescence stability in printed CNT film, a new co-sintering process for cathode fabrication was presented to improve the luminescent stability of fully printed CNT-FED. By co-sintering the printed silver and CNT layers, CNTs geometrically matched with Ag surface and/or embedded into Ag layer at the bottom of the co-sintered film, large CNTs block and bulk silver nested each other at the top of the co-sintered film. All these structures increased the contact area at CNT/Ag interface, which could increase the probability of forming ohmic contact at CNT/Ag interface. The luminescent stability of printed CNT-FED with co-sintered cathode could be improved as 5.6 times high as that of common devices.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    15
    References
    2
    Citations
    NaN
    KQI
    []