Impact of Bisphenol A on the Physicochemical and Bacteriological Characteristics of Water in Storage Tanks from various Locations in Salem University Lokoja, Kogi State, Nigeria

This study examined the impact of Bisphenol A (BPA) on the physicochemical and bacteriological characteristics of water in storage tanks in Salem University Lokoja. Borehole water samples were collected from three (3) locations within the University environment and stored in a jerry can for analysis. Total Heterotrophic Bacteria Count (THBC) in water samples ranged from 1.00± 0.30 x104 at week 0 to 8.95±1.00 x104 cfu/ml at week 3, while the total coliform count (TCC) also ranged from 1.30±0.15 x104 to 7.11±0.82 x104 cfu/ml. TCC and THBC were found to be higher than the NSDWQ Standard. The identified isolates from the borehole samples were Escherichia coli, Pseudomonas aeruginosa, Streptococcus faecalis, Bacillus cereus, Staphylococcus epidermidis and Serretia spp. Bisphenol A (BPA) was not detected in week 0, after week 3, components of Bisphenol A detected were methyl chloride, Benzene and Dichlorobenzene and their highest values were 0.054±0.033, 0.021±0.020 and 0.055±0.062 mg/l respectively. The pH, Turbidity, Total suspended solids, BOD and conductivity reduced as storage increased. Magnesium and calcium for sample B were found to have the highest value of 0.31 and 1.73 mg/l respectively. Storage of water for a long period of time should be discouraged as it could trigger increased leaching of BPA into the water which will affect its physicochemical and microbiologically quality. Keywords: Bacteria, Bisphenol A, Storage Water Tanks, Drinking Water Quality.