Multicomponent transport model-based scaling up of long-term fixed bed adsorption of reactive dyes from textile effluent using aminated PAN beads.

Novel functionalized polymeric beads have been prepared by a simple phase inversion technique and its potential as an effective sorbent for reactive dyes is studied. Polyacrylonitrile was used as the base polymer for the beads that were further functionalized using diethylenetriamine. Scanning electron microscopy, FTIR spectroscopy, BET technique, TGA analysis, and zeta potential measurement were used for characterization of the functionalized beads. The adsorption characteristics of the beads were analyzed through adsorption isotherms. A first-principle-based pore diffusion-adsorption model was employed to study adsorption process of the functionalized beads and to determine various mass transfer parameters, i.e., mass transfer coefficient and effective pore diffusivity, in both single and multicomponent cases. For different reactive dyes, the beads have adsorption capacities in the range of 170-230 mg/g. Effects of different operating parameters, i.e., inlet concentration of solute, influent rate, and bed depth were studied to determine the breakthrough performance of the columns prepared with the beads. Industrial dye effluent, containing four reactive dyes at different initial concentrations, was used to study multicomponent adsorption in the columns. The regeneration efficiency of the beads was determined using aqueous cationic surfactant solution. Finally, scaling up of the fixed bed columns was carried out using a first principle-based transport model based on pore diffusion-adsorption processes.