High Damping Characteristics of an Elastomer Particle Damper
2016
Research testing has led to the development of an Elastomer Particle Damper (EPD), which can add considerable damping to a structure by directing the vibration to a set of interacting elastomer particles through a rigid connection. This vibration treatment presents highly nonlinear behavior that is strongly dependent on both the vibration amplitude and frequency. Curves of damping loss factor (DLF) of an EPD system with vertical motion as a function of frequency and acceleration are reported herein. The results show that the elastomer particle damper has two distinct damping regions. The first region is related to the fluidization state of the particles, as described in the literature, obtained when the damper is subjected to vertical acceleration close to 1 g and frequencies below 50 Hz. The second region presents high values of DLF to acceleration values lower than 1 g, and the frequency range is dependent upon the stiffness of the particles. A high degree of effectiveness is achieved when the working frequency of the elastomer particle dampers is tuned to a natural frequency of a plate and when they are strategically located at points having large displacement. The performance of EPDs was compared with that of a commercial constrained layer damping installed in an aircraft floor panel. The EPDs achieved an acceleration level attenuation in the aircraft floor panel similar to that of the commercial constrained layer damping system.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
3
Citations
NaN
KQI