Evaluation of two crack models for reinforced concrete one-way slabs subjected to bending by means of modal tests

Abstract Cracks can affect a reinforced concrete (RC) structure and the evaluation of damage related to them is a typical application of structural health monitoring systems. This way, two RC one-way slabs with different reinforcement ratios were tested in laboratory in a four-line static load test scheme, followed by modal testing. Using modal testing data, finite element models of the cracked structures were prepared and calibrated for several cracked stages, to evaluate which crack model would present a better performance when compared to the experimental counterparts. Cracks were simulated via a reduction of flexural stiffness by penalizing the elastic modulus. Two continuous crack models were evaluated: Model 1 which employs reduction factors based on the ratio of moment of inertia after the cracking moment is reached and the moment of inertia of the uncracked section; Model 2 which is based on the stiffness reduction in the region of influence of each crack. The evaluation of both models was made using natural frequencies and mode shapes (through Modal Assurance Criterion-MAC indicator) as indicators, and Model 2 presented better results. An additional approach to globally reduce stiffness in the early stages of load before visible cracks appear and also in uncracked regions was shown necessary, to take into account the reductions on natural frequencies observed in the tests. By employing the stiffness reduction factors obtained for Model 2 it was possible to evaluate the crack depth evolution along the load stages.