On the correlation between the structure and one stepping characteristic of a piezo-driven rotary actuator
2016
The parasitic motion principle was recently proposed to design piezo-driven actuators. Based on this principle, linear and rotary actuators with features of compact structure, large motion range, high velocity and high positioning resolution have been reported. However, some shortcomings such as the backward motion and the nonlinearity still exist and their causes are not clarified. To find potential reasons leading to these shortcomings, one stepping characteristic of a piezo-driven rotary actuator designed by the parasitic motion principle was investigated in this paper, and the correlation between the structure and one stepping characteristic was attempted to be established by theoretical analysis and simulations. Analysis results indicated that the nonlinearity in one stepping characteristic of the rotary actuator was correlated to the small gap between the inner and outer rings of the bearing as well as the self-deformation of the flexible gripper after the contact stiffness between the flexible gripper and the rotor reaches to the maximum value. The backward motion could be mainly resulted from the non-ideal driving wave. These analysis results enhance the understanding of the parasitic motion principle, which are meaningful for design and performance improvement of the parasitic motion principle linear or rotary actuators.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
25
References
11
Citations
NaN
KQI