Research on the influence of dielectric characteristics on the EDM of titanium alloy

This study investigated the influences of dielectric characteristics, namely, electrical conductivity, oxidability, and viscosity on the electrical discharge machining (EDM) of titanium alloy. A new kind of compound dielectric with optimal processing effect was developed based on the identified effects. Comparative experiments on titanium alloy EDM in compound dielectric, distilled water, and kerosene were performed to analyze the difference in material removal rate (MRR), relative electrode wear ratio (REWR), and surface roughness (SR). The experimental results revealed that titanium alloy EDM in compound dielectric achieved the highest MRR, a lower REWR than that in kerosene, and better SR and fewer micro-cracks than that in distilled water.