RF-source development for ITER: Large area H− beam extraction, modifications for long pulse operation and design of a half size ITER source
2005
Abstract With an extraction area of 152 cm 2 a calorimetrically measured H − current density of 19.3 mA/cm 2 has been achieved at 0.45 Pa with 90 kW RF power. With 306 cm 2 the electrically measured H − current has reached up to 9.7 A corresponding to 32 mA/cm 2 at 100 kW. The current on the calorimeter is limited by the extraction system. Down to 0.2 Pa only a weak dependence on the source pressure has been observed. The test bed will be upgraded to demonstrate cw operation with deuterium. Based on the tested prototype a half size ITER RF-source of 80 cm × 90 cm with 360 kW RF power has been designed.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
4
References
8
Citations
NaN
KQI