Canola Oil Based Poly(ester–ether–amide–urethane) Nanocomposite and Its Anti-Corrosive Coatings

The environmental and health hazards associated with petro-based chemicals have motivated the researchers to replace them partially or wholly with renewable resource-based polymers. Vegetable oils serve as an excellent alternative to this end as they are cost effective, eco-friendly, easily available and rich with functional groups amenable to chemical reactions. The aim of the research work is to prepare Canola oil [CANO] derived poly (ester–ether–amide–urethane) (CPEEUA) nanocomposite coating material using N,N-bis (2-hydroxyethyl) fatty amide [CFA] obtained from CANO, Lactic acid [LA], and reinforced with Fumed Silica [FS]. CPEEUA was obtained by esterification, etherification, and urethanation reactions and its structure was confirmed from FTIR and NMR spectral analyses. CPEEUA/FS coatings were found to be scratch resistant, flexible, well-adhered to mild steel panels, and hydrophobic with 2.0–2.5 kg scratch hardness, 150lb/inch impact resistance and >90° contact angle value. They exhibited good corrosion protection in 3.5 wt% NaCl solution as investigated by Potentiodynamic Polarization and Electrochemical Impedance tests. CPEEUA coatings are safe for usage up to 200 °C.