Wharf structure model

The utility model provides a wharf structure model which comprises a wharf face, wharf piles and approach bridge faces. The number of the approach bridge faces is no less than two, and the approach bridge faces and the wharf face are of an integrally-formed structure. The bottom of the wharf face and the bottoms of the approach bridge faces are respectively and fixedly provided with a set of wharf piles which are parallel to one another, and three adjacent wharf piles on the wharf face constitute one wharf face pile set. The wharf face pile sets are fixedly mounted at the bottom of the wharf face and are perpendicular to the length direction of the wharf face. Two adjacent wharf piles on the same approach bridge face constitute one approach bridge face pile set, and the approach bridge face pile sets are fixedly mounted at the bottoms of the approach bridge faces and are perpendicular to the length directions of the approach bridge faces. After plastic panels and pile groups used by the wharf structure model are bonded, the strength is high, firmness is achieved, scattering can not happen easily, the weight is low, the arrangement of the wharf pile sets is reasonable and compact, it can be guaranteed that the wharf structure model can not be flushed away by water flow under a testing condition, the original position of the wharf structure model is guaranteed, and the wharf structure model is feasible. The surface of plastics is smooth, it is guaranteed that the wharf structure model can be used in a long term theoretically, and the service life of the wharf structure model is prolonged.