Thermally Controlled Construction of Fe-Nx Active Sites on the Edge of a Graphene Nanoribbon for an Electrocatalytic Oxygen Reduction Reaction.

Pyrolytically prepared iron and nitrogen codoped carbon (Fe/N/C) catalysts are promising nonprecious metal electrocatalysts for the oxygen reduction reaction (ORR) in fuel cell applications. Fabrication of the Fe/N/C catalysts with Fe-Nx active sites having precise structures is now required. We developed a strategy for thermally controlled construction of the Fe-Nx structure in Fe/N/C catalysts by applying a bottom-up synthetic methodology based on a N-doped graphene nanoribbon (N-GNR). The preorganized aromatic rings within the precursors assist graphitization during generation of the N-GNR structure with iron-coordinating sites. The Fe/N/C catalyst prepared from the N-GNR precursor, iron ion, and the carbon support Vulcan XC-72R provides a high onset potential of 0.88 V (vs reversible hydrogen electrode (RHE)) and promotes efficient four-electron ORR. X-ray absorption fine structure (XAFS) and X-ray photoelectron spectroscopy (XPS) studies reveal that the N-GNR precursor induces the formation of iron-coordinating nitrogen species during pyrolysis. The details of the graphitization process of the precursor were further investigated by analyzing the precursors pyrolyzed at various temperatures using MgO particles as a sacrificial template, with the results indicating that the graphitized structure was obtained at 700 °C. The preorganized N-GNR precursors and its pyrolysis conditions for graphitization are found to be important factors for generation of the Fe-Nx active sites along with the N-GNR structure in high-performance Fe/N/C catalysts for the ORR.