A 400–500 GHz Balanced SIS Mixer with a Waveguide Quadrature Hybrid Coupler

We have developed a 400–500 GHz low-noise balanced SIS (Superconductor Insulator Superconductor) mixer, which is based on a waveguide RF quadrature hybrid coupler. The RF quadrature hybrid was designed and fabricated as a broadband hybrid with good performance at 4 K. The fabricated RF quadrature hybrid was measured at room temperature with a submillimeter vector network analyzer to check amplitude and phase imbalance between two output ports. Then the balanced mixer was assembled with the RF hybrid, two DSB mixers, and a 180° IF hybrid. Several important parameters such as noise temperature, LO power reduction, and IF spectra were measured. The LO power reduction is defined as how much LO power the balanced mixer saves compared with a typical single-ended mixer. The measured noise temperature of the balanced mixer was ~ 55 K at the band center which corresponds to ~ 3 times the quantum noise limit (hf/k) in DSB, and ~ 120 K at the band edges. The noise performance over LO frequency was almost the same as that of the worse DSB mixer used in the balanced mixer. In addition the LO power required for the balanced mixer is ~ 11 dB less than that of the single-ended mixers.