Physical simulation and quantitative calculation of increased feldspar dissolution pores in deep reservoirs

Abstract The physical simulation of diagenesis was conducted for the Cretaceous Bashijiqike Formation deep sandstone reservoir in Kelasu structural belt of Kuqa Depression, Tarim Basin, and the dissolution rate and increased dissolution pores of feldspar matrix grains in such reservoirs were quantitatively calculated in the process from long-term shallow burial in early stage to quick deep burial in late stage. Through the field emission large-area SEM analysis, the dissolution rate and increased dissolution pores of feldspar matrix grains in core samples taken from Dabei and Keshen areas were quantitatively calculated. After the experimental data and the actual core data were cross-checked, the evolution model was established for increased feldspar dissolution pores in deep continental reservoirs with high content of feldspar matrix grains. According to the calculation results, the maximum increased feldspar dissolution pores in Keshen area during the process from long-term shallow burial in early stage to quick deep burial in late stage is by 0.86%−2.05%. The simulated sandstone reservoir with burial depth of more than 7 000 m reveals a larger quantity of increased feldspar dissolution pores, with the absolute error value of 0.23% after calibration. In Dabei area, calcite is the primary contributor to secondary dissolution pores, followed by feldspar. Quantitative calculation shows the maximum increased feldspar dissolution pores in Dabei area to be by 0.62%−1.48%. Similarly, the simulated sandstone reservoir with burial depth of more than 7 000 m reveals a larger quantity of increased feldspar dissolution pores, with the absolute error value of 0.15% after calibration. There are two causes of the experiment errors: One cause is that the simulation experiment uses ideal conditions and the simulation reservoirs are homogeneous; Another one is that deep reservoirs have strong heterogeneity and there are big differences in the dissolution within different areas.