Investigation into the Computational Techniques of Power System Modelling for a DC Railway
2006
This paper describes how the use of computer simulation techniques is now a fundamental part of the design process for electrified railways and at the feasibility stage clients will often request detailed calculations to be performed for the basic design. This will establish a level of confidence in both the project and basic design parameters that will justify the capital expenditure further on in the project life-cycle. This paper addresses how the total impedance of a railway network may be represented, where the impedances of the traction return circuit and traction power system are either combined together to form one impedance or studied independent of one another. The accuracy of the modeling in this manner, particularly how it affects the accuracy of rail voltage results shall be assessed. It will also examine how much impedance is typically in the rails and what proportion this needs to be before it has an unacceptable effect on the numerical results. To assess this, a range of proportions will be studied, for example 70% of the total impedance to be modeled in the conductor with 30% modeled in the rails, 60%/40%, etc. In this way, a proper scientific assessment of the combined or split calculation methods can be made via simplified case studies.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
6
References
13
Citations
NaN
KQI