100 MHz large bandwidth preamplifier and record-breaking 50 kHz scanning rate quantum point contact mode probe microscopy imaging with atomic resolution

The high-bandwidth preamplifier is a vital component designed to increase the scanning speed of a high-speed scanning tunneling microscope (STM). However, the bandwidth is limited not only by the characteristic GΩ feedback resistor RF but also by the characteristic unity-gain-stable operational amplifier (UGS-OPA) in the STM preamplifier. Here, we report that paralleling a resistor with the tunneling junction (PRTJ) can break both limitations. Then, the UGS-OPA can be replaced by a higher rate, higher antinoise ability, decompensated OPA. By doing so, a bandwidth of more than 100 MHz was achieved in the STM preamplifier with decompensated OPA657, and a higher bandwidth is possible. High-clarity atomic resolution STM images were obtained under about 10 MHz bandwidth and quantum point contact microscopy mode with a record-breaking line rate of 50 k lines/s and a record-breaking frame rate of 250 frames/s. Both the PRTJ method and the decompensated OPA will pave the way for higher scanning speeds and play a key role in the design of high-performance STMs.