Manufacturing and assembly status of main components of the Wendelstein 7-X cryostat

Abstract The stellarator fusion experiment Wendelstein 7-X (W7-X) is at present in assembly at the Max-Planck Institut fur Plasmaphysik (IPP). The toroidal plasma with a ring diameter of 11 m and an average plasma diameter of 1.1 m is contained within the plasma vessel. Its form is dictated by the shape of the plasma. The form of the plasma is controlled by the coil system configuration. To control the plasma form it is necessary that all the 20 planar and 50 non-planar coils should be positioned within a tolerance of 1.5 mm. To meet this requirement a complex coil support structure was created, consisting of the central support ring and the different inter coil supports. The coils and the support structure are enclosed within the outer vessel with its domes and openings. The space between the outer and the plasma vessel is called cryostat because the vacuum inside provides thermal insulation of the magnet system, and the entire magnetic system is then be cooled down to 4 K. Due to the different thermal movements the plasma vessel and the central support ring have to be supported separately. The central support ring is held by 10 cryo legs. The plasma vessel supporting system is divided into two separate systems, allowing horizontal and vertical adjustments to centre the plasma vessel during thermal expansion. This paper aims to give an overview of the main components in the cryostat like the plasma vessel, the outer vessel, the ports and the different support systems. It describes the current manufacturing and assembly status and the associated problems of these components, using pictures and text. This paper does not describe the general assembly situation or time schedules of the Wendelstein 7-X.