Coupled heat and fluid flow model and experimental verification of aluminium plate die casting

AbstractThe present work aims to forecast mould filling, void shape, location and size as well as columnar to equiaxed transition (CET) in commercial pure aluminium casting. A model coupling the momentum equations of the fluid flow and heat transfer equations is presented, in which metallostatic pressure, air gap and oxide layer are considered. Different casting parameters were investigated such as casting configuration by varying the plate thickness from 5 to 20 mm, melt superheat from 40 to 120°C, mould preheat up to 200°C and different pouring heads ranging from 0·3 to 0·6 m. Regarding the microstructure and void formation, the approach based on the Niyama criterion, was considered. The experimental verification of the model was achieved by gravity die casting in the form of a rectangular cavity. Voids inside aluminium plate were investigated by X-ray imaging. Microstructure and CET was investigated microscopically. The supposed model proves its validity for mould filling and in detecting the void feat...