A Shear-Mode Ultrasonic Motor Using Potassium Sodium Niobate-Based Ceramics with High Mechanical Quality Factor
2008
(K,Na)NbO3–LiNbO3–CuO lead-free piezoelectric ceramics that show a high mechanical quality factor Qm were synthesized and used as a drive element of an ultrasonic motor. The Qm of the (K,Na)NbO3 ceramic could be enhanced by chemical modification using Li and Cu as well as microstructure control to obtain ceramics with fine grains. The grain size dependence of the Qm was consistent with a model based on the formation of internal bias field to stabilize the domain structure. A shear mode was used to drive the ultrasonic motor because the piezoelectric d31 and d33 constants of the ceramics were not sufficient for the motor applications. A shear-mode motor driven with four piezoelectric ceramic plates was developed using the lead-free ceramics with a high Qm of 1400, a high d15 of 207 pC/N, and a high k15 of 0.72. The highest revolution speed of 486 rpm was achieved at 34.5 kHz with the input voltage of approximately 180 Vp–p (peak to peak).
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
11
References
62
Citations
NaN
KQI