High resolution hole patterning with EB lithography for NIL template production

Nano imprint lithography (NIL) is one to one lithography and contact transfer technique using template. Therefore, the lithography performance depends greatly on the quality of the template pattern. In this study, we investigated the resolution and the defect level for hole patterning using chemical amplified resists (CAR) and VSB type EB writer, EBM9000. To form smaller pattern with high quality, high resolution resist process and high sensitivity etching process are needed. After these elements were optimized, we succeeded to form 24 nm dense hole pattern on template. In general, it is difficult to suppress the defect density in a large area because of fogging effect and process loading and so forth. However, from the view point of defect quality, 26 nm hole pattern is achieved to form with practical level in a large area. Therefore, we indicate the capability of forming 26 nm hole master template which will be required in 2019 from ITRS2013. These results show that this process is possible to obtain less than 30 nm hole pattern without enormous writing time. As future work, we will imprint master to replica template and check the printability.