In vitro study of the adherence of Candida albicans to acrylic resins: relationship to surface energy.

PURPOSE: This study aimed to determine whether small variations in the composition of the polymethylmethacrylate (PMMA) of widely used dentures produce differences in the degree of Candida albicans adherence and to relate any differences found to the surface energy of the resins, which appears to play a major role in the initial phases of microorganism adhesion. MATERIALS AND METHODS: A reference strain of C albicans (18.804 ATCC) and 11 different PMMAs (Vacalon, Inkotherm 85, Veracril, Probase Cold, Inkotherm Press, Inkotherm 85 T, Ruthinium, Vertex, SR Ivocap, Idoacryl, Lucitone) were used. Fifty specimens (15 x 10 x 1 mm) of each type were prepared. C albicans adhesion was determined by microorganism count under fluorescent optical microscope, and the surface energy of the resins was calculated by the contact angle method. P .05) differences in some cases. Despite small variations in the composition of the resins, their surface energy values were very similar (38.78 to 41.2 mJ/m2), and no relationship was found between C albicans adhesion and surface energy. CONCLUSION: The adhesion of C albicans to different resins varied in vitro, possibly as a result of the action of residual postpolymerization products. According to these results, variations in surface energy that result from differences in the composition of the different PMMA resins appear to have no influence on the adhesion of C albicans or, therefore, on the onset of denture stomatitis.