Hybrid physical-chemical vapor deposition of Bi2Se3 films
2016
Abstract Bi 2 Se 3 thin films were grown on c -plane sapphire substrates by hybrid physical-chemical vapor deposition (HPCVD) using trimethyl bismuth (TMBi) and Se pellets. A Se-rich environment is created by evaporating Se pellets in the vicinity of the substrate, which is used to suppress the formation of Se vacancies. The effects of pre-cracking temperature and substrate/Se temperature on the growth rate, structural and electrical properties of the Bi 2 Se 3 films were investigated. C -axis oriented films were obtained which show a reduction in the carrier concentration as pre-cracking temperature was increased from 290 °C (1.6×10 19 cm −3 ) to 350 °C (8.4×10 18 cm −3 ). An additional reduction in carrier concentration (7.28×10 18 cm −3 ) was observed on increasing the substrate temperature from 200 to 260 °C.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
13
References
4
Citations
NaN
KQI