Dual-Band Antenna Pair with Lumped Filters for 5G MIMO Terminals

This paper proposes a novel design of the dual-band antenna pair. Starting from the single-band antenna pair composed by T-shaped monopole and T-shaped slot that are intersected with each other, orthogonal T-monopole and odd-symmetrical slot modes are excited. By adding symmetrical low-pass high-stop filters into the horizontal stub of the T-monopole and high-pass low-stop filters into the gap of the T-slot, an extra mode is introduced for each antenna, producing dual band operation. Impedance bandwidths and radiation efficiencies of both bands can be adjusted flexibly using the filters. A detailed design guideline is given. The dual-band antenna pair operating at partial N78 (p-N78, 3.4~3.6 GHz and partial N79 (p-N79, 4.8~4.9 GHz) is with the footprint of 15×6 mm2. The measured results show that the average efficiencies are both -3.4dB at p-N78/p-N79 for the odd-symmetrical slot and -2.8dB/-3.7dB at p-N78/p-N79 for the T-monopole, isolations are better than -16.8 dB at p-N78 and -11.8 dB at p-N79, and ECCs are lower than 0.1 at p-N78 and 0.2 at p-N79. The proposed dual-band antenna pair exhibits a great potential to be applied in 5G MIMO terminal.