Crack growth modeling of tension lap spliced reinforced concrete beams strengthened with fibre reinforced polymer wrapping under fatigue loading
2018
Abstract This study was aimed at increasing our understanding of the behavior of the bond between a steel bar and the concrete along a lap splice region for structures subjected to cyclic loading. An additional aim of the study was to investigate the effect of fatigue loading on the bond between concrete and steel, and the ability of the new high and low modulus fiber-reinforced polymer (FRP) sheets to enhance the fatigue performance of a tension lap splice. A crack growth model was developed to calculate the fatigue life of the bond specimens. The model results were compared with the experimental outcomes of fifty-three beams tested under fatigue and monotonic loading. There is a good agreement between the calculated number of cycles and the actual fatigue life data for all different wrapping conditions and different concrete cover thicknesses. The difference between the calculated and measured fatigue strength curves did not exceed seven percent.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
19
References
7
Citations
NaN
KQI