Feasibility Study on Honeycomb Ceramics for Catalytic Combustor

This paper contains results of a structural feasibility study on honeycomb ceramic materials used for catalytic combustors in power gas turbines. Extruded cordierite honeycomb substrates are widely used as catalyst carriers in automotive exhaust systems, because of their excellent thermal shock resistance. For gas turbines, however, the ceramic catalyst carriers should retain the reliability at high temperature.In a hybrid catalytic combustor, which handles both catalysis and gas phases combustion, cordierite honeycomb structures (melt at 1445°C) can be adopted as the catalyst carrier, because the auxiliary gas phase combustion makes catalyst temperature lower than the conventional catalytic combustor.During this study, cordierite honeycomb (200 square cells/in2) tensile tests were carried out at high temperatures up to 1000°C. Using the finite element method, stresses in a cell wall were analyzed. The honeycomb cell wall mechanical strength was derived by comparing the experimental and analytical results. Also, combustor honeycomb cell stresses were calculated under typical oprerating conditions. Consequently, it was shown that it is sufficiently feasible to use the cordierite honeycomb structure as a catalyst carrier for hybrid catalytic combustors.Copyright © 1989 by ASME