Passive Chatter Suppression of Thin-Walled Parts by Means of High-Damping Lattice Structures Obtained from Selective Laser Melting

Chatter vibrations arising during machining operations are detrimental for cutting process performance, since they may cause poor surface quality of the machined part and severe damages to machine tool elements. Passive approaches for chatter suppression are based on the integration of special mechanical components with high-damping properties within the machining system. They represent a good solution to this problem thanks to their intrinsic simplicity. Recently, the application of metallic lattice structures inside 3D printed parts obtained from the Selective Laser Melting technology have proven superior damping properties with respect to the same full density material. Here, this idea is further explored by considering the novel configuration where the unmelted powder grains are retained inside the lattice structure by an external shell, acting as a multiplicity of microscopic mechanical dampers. This concept is applied for passive chatter suppression of thin-walled parts that are of particular relevance for industry. Preliminary experimental investigation was first carried out on simple beam-like specimens, and then on thin-walled benchmarks that were identified through modal analysis and tested under real cutting conditions. The main conclusion is that the novel proposed configuration (lattice plus unmelted powder) has higher damping properties with respect to the full density and lattice alternatives. Accordingly, it may be successfully applied for passive chatter suppression in real machining operations.