Effect of Press-Fit on Frictional Torque Generated at the Articulating Surfaces of Acetabular Shells With Fixed and Dual Mobility Bearing Insert Designs

IntroductionFrictional torque is generated at the hip joint during normal gait loading and motion [1]. This study investigated the effect of shell deformation due to press-fit on frictional torque generated at the articulating surfaces of cementless acetabular shells that incorporated fixed and dual mobility bearing designs.Materials and MethodsFigure 1 lists the study groups (minimum of n = 5). All groups were tested with a 50 mm Trident PSL shell (Stryker Orthopaedics, NJ) and a Ti6Al4V trunnion. Metal-on-Metal specimens were custom designed and manufactured, and are not approved for clinical use. The remaining groups consisted of commercially available products (Stryker Orthopaedics, NJ).All groups were tested with the shells in deformed and undeformed states.Deformed Setup: A two-point relief configuration was created in a polyurethane foam block (Figure 2) with a density of 30 lb/ft3 to replicate shell deformation due to press-fit [2]. The blocks were machined to replicate the press-fit prescribed in...