Design, Construction, and Test of HTS/LTS Hybrid Dipole

This paper presents the design, construction, and test results of a hybrid dipole magnet. The inner coils were of second generation (2G) high-temperature superconductor (HTS) ReBCO tape and the outer coils were of low-temperature superconductor (LTS) Nb 3 Sn Rutherford cable. The HTS and LTS coils were independently powered and protected using different power supplies. The HTS coils were quenched many times with no degradation in performance observed. The hybrid field reached ∼8.6 T, which is believed to be a record for a hybrid dipole. The maximum field was limited by the stable operation of the leads in the LTS coil at 8000 A. The HTS coils were independently ramped to 800 A, and the LTS coils to 10 000 A. With improved leads and instrumentation, this hybrid dipole is expected to produce over 13 T when the ReBCO tape in the HTS coil is aligned nearly parallel to the field. One major purpose of this program was to perform magnetization studies in the coils made with the HTS tape. Magnetization-induced field errors are expected to be small when the field is nearly parallel to the wide face of the tape. The magnetization measurements were performed at 77 K with the two racetrack coils in two orientations, with field predominantly either parallel or perpendicular to the wide face of the HTS tape. In addition, measurements were also performed at 4 K in different background fields provided by the outer Nb 3 Sn coils. This paper will summarize the magnetization measurements and present the quenching experience of the HTS coils in this hybrid magnet system.