Characterization of porous fluorohydroxyapatite bone-scaffolds fabricated using freeze casting.

Abstract: With the increasing demand for orthopedic and dental reconstruction surgeries, there comes a shortage of viable bone substitutes. This study was therefore designed to assess the efficacy of porous fluorohydroxyapatite (FHA) as a potential bone substitute. For this, porous FHA scaffolds were fabricated using the freeze casting technique. They were then sintered at 1250, 1350 and, 1450 °C, and microstructural, mechanical, and in vitro properties were analyzed. The microstructure analyses revealed the porosity remained constant within the temperature range. However, the pore size decreased with increasing sintering temperature. The greatest compressive strength and elastic modulus were obtained at 1450 °C, which were 13.5 ± 4.0 MPa and 379 ± 182 MPa, respectively. These are comparable values to human trabecular bone and other porous scaffolds made using hydroxyapatite. This analysis has thus helped to attain an understanding of the mechanical and material properties of freeze-cast FHA scaffolds that have not been presented before. In vitro studies revealed an increasing rate of human osteoblast cell proliferation on freeze-cast FHA scaffolds with increasing sintering temperature, suggesting improved osteogenic properties. Additionally, osteoblasts cells were also shown to proliferate into the interior pores of all freeze-cast FHA scaffolds. These results indicate the potential of porous FHA scaffolds fabricated using the freeze-casting technique to be utilized clinically as bone substitutes.