Study of the radioactive contamination of the ion source complex in the Selective Production of Exotic Species (SPES) facility

The Isotope Separation On-Line (ISOL) technique is today established as one of the primary methods to produce high-intensity and high-quality radioactive beams. This technique produces, for a given amount of the desired isotope, many orders of magnitude of other radioactive species. Due to the activation generated by interactions of the primary beam, intense neutron fields, and deposition of the produced radioactive ions inside beam line elements, an ISOL facility in operation becomes an intense radioactive source. Therefore, the biological hazard imposes severe radiological safety challenges to the design, operation, maintenance, and final decommissioning of such facilities. A challenging component is the ion source complex, where the ion extraction electrode provides the extraction of radioactive ions from the ion source and the first acceleration to the extracted beam. The radioactive contamination of this sub-component is studied, by means of the FLUKA code, in the case of the Selective Production of Exotic Species facility, which is in the advanced construction phase at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro, Padua, Italy. The developed model includes isotope production by the interactions of a 40 MeV energy proton beam on a 238UCx target, selection of radioactive isotopes that are able to stick on the electrode tip, time evolution of the deposited isotopes during the operation and cooling periods before maintenance interventions, and evaluation of the ambient dose equivalent rate generated by the contamination of the electrode tip. Based on these results, the possibility of manual interventions for maintenance and emergency vs the use of remote handling systems is discussed.