Flexible kesterite Cu2ZnSnS4 solar cells with sodium-doped molybdenum back contacts on stainless steel substrates

Abstract In this work we report the Na incorporation from Na-doped Mo (Mo-Na) back contact for kesterite Cu 2 ZnSnS 4 solar cells on flexible stainless steel substrates. It is demonstrated that Na can be effectively incorporated into CZTS by inserting Mo-Na layer at back contact. Direct contact of CZTS and Mo-Na layer leads to poor homogeneity and adhesion. The thickness of MoS 2 formed at the back contact depends on the presence of Na and whether Mo contacts with CZTS directly. Back contact configuration with a Mo capping layer on Mo-Na layer is found to be helpful to maintain the advantages of Mo back contact and control the thickness of MoS 2 interface. As a result, CZTS device fabricated on this configuration yields higher conversion efficiency of 6.2%. However, this efficiency is still far lower than that on traditional soda lime glass substrate which shows efficiency over 8%. The loss mechanism of device fabricated on stainless steel is investigated and analyzed according to the device performance and electrical parameters.