Fabrication and Characterization of Fine Filaments of NbTi in a Copper Matrix

Practical multifilamentary Nb-46.5 Wt. % Ti/Cu composites have been made by a double extrusion process. The composites contain up to 6000 filaments with a diameter of 2 to 6 μm at the final wire size. Through careful attention to the billet design and thermo-mechanical processing, the formation of intermetallics (Cu-Ti-Nb) is virtually halted. The intermetallic precipitates, when allowed to form at the filament surface, interfere with the uniform reduction and give rise to poor filament quality; including filament breaks and reduction in critical current density, Jc. The integrity of the present fine filaments is studied with SEM and compared with that of conventionally processed material. The Jc, as a function of the filament size, is investigated over a transverse magnetic field of up to 8 Tesla. The value of ‘n’ in ρ=kIn is measured and the results are compared to those obtained for similar M.F. wires currently under study at other institutions. It is hoped that the fine filamentary wire produced by the double extrusion process will greatly reduce the magnetization which is responsible for field distortions in the High Energy Physics program applications.