A two-dimensional position-sensitive microchannel plate detector realized with two independent one-dimensional resistive anodes.

A two-dimensional position-sensitive microchannel plate detector, with a O100 mm sensitive area and equipped with four integrated amplifiers, is realized with a new anode scheme. The anode is constructed by two independent one-dimensional resistive anodes, each consisting of an array of parallel copper strips connected by resistors in series on a printed circuit board (PCB). The arrays are perpendicularly aligned to realize two-dimensional position resolution, with the intervals between the adjacent strips on the PCB nearer to the microchannel plate cut out to allow electrons passing through. The detector is tested with an 55Fe x-ray source, and a position resolution of 0.38 mm is achieved.