Behaviour of iron ore-fuel oil composite pellets in isothermal and non-isothermal reduction conditions

AbstractSelf-fluxing iron ore pellets as an alternative to the agglomeration process led to the use of low price fuel oil as a binder and reducing material. Composite pellets containing 5–15% fuel oil were isothermally and non-isothermally reduced at 750–1000°C in a flow of H2 or N2 gases. The total weight loss resulting from O2 removal from the reduction of Fe2 O3 and from the thermal decomposition of fuel oil was continuously recorded as a function of time at different reduction conditions. The actual reduction extent at a given time was calculated from the chemical analysis of partially reduced samples at a given time and temperature. Microscopic examination and X-ray phase analysis were applied to characterise the reduction products. The isothermal reduction of composite pellets indicated that the reduction rate increased with the increase in fuel oil content at the early stages. At the later stages, the reduction rate increased in the order 12>10>5> 15% fuel oil containing pellets. The non-isothermal...