A process for the production of plastic moldings with functional surface-chen

A process for the production of plastic moldings with functional surfaces, in which formed on a carrier film, a coating formed, the coated carrier film and back-injected with a liquid plastic material, or back-foamed and the coating - if nocht does not take place - cured or aftercuring, wherein the coating at least temporarily with is covered a protective film, which - in the temperature range from room temperature to 100 ° C has a storage modulus E 'of at least 10 - preferred direction longitudinal and transverse to the generated by using in the preparation of (S) directed manufacturing process at 23 ° C an elongation at break> 300%, and - at a layer thickness of 50 microns has a transmission> 70% for UV radiation and visible light of a wavelength 230-600 nm facing the coating side and its - a hardness <0.06 GPa at 23 ° C and - a using the atomic force miscroscopy (AFM) certain roughness corresponding to an R