Uncoupling the size and support effects of Ni catalysts for dry reforming of methane

Abstract The dry reforming of methane (DRM; CH 4  + CO 2 ↔  2H 2  + 2CO) can be a good way to utilize greenhouse gases for the production of valuable syn-gas. Ni-based catalysts have been used for this reaction; however, the Ni size effect and support effect were highly coupled and therefore could not be observed separately. Here, a unique catalyst in which the Ni nanoparticle size and support can be varied independently was devised. Highly uniform Ni nanoparticles with sizes of 2.6, 5.2, 9.0, and 17.3 nm were tested for DRM at 800 °C without a significant change in the Ni size, and overlayers of various metal oxides, including SiO 2 , Al 2 O 3 , MgO, ZrO 2 , TiO 2 , were tested with the 5.2 nm of Ni nanoparticles. The dependence of the CH 4 or CO 2 turnover frequency on the Ni size and support was evaluated separately. The 2.6 nm Ni nanoparticles showed 4.1 times higher methane turnover frequency than those with a size of 17.3 nm. When various metal oxide overlayers were tested with the same 5.2 nm Ni, Al 2 O 3 exhibited 4.3 times higher methane turnover frequency than SiO 2 . The independent observation of the effects of the Ni nanoparticle size and support will provide valuable guidelines for designing effective methane dry reforming catalysts.