CHARACTERIZATION OF MICROSTRUCTRAL MORPHOLOGY OF AUSTEMPERED DUCTILE IRON BY ELECTRON MICROSCOPY

: Mechanical properties of austempered ductile iron (ADI) are mainly controlled by its unique microstructure. The objectives of this paper are to characterize the microstructural morphology and the phase distribution of ADI using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and to determine the mechanism of strengthening and toughening of ADI. The experimental results show that, in the microstructure of ADI composing of upper bainite, retained austenite, graphitic nodule, and a small amount of martensite, the upper bainite is composed of sub-units of ferrite in the shape of "wheat ears" on which the "wheat grains" grow at an angle of about 60 degrees to the long axis of the "wheat ears." The retained austenite is connected with each other in the shape of a continuous net. The wheat-ear like bainite with a homogeneous distribution in the continuous austenite net plays an important role to the strengthening and toughening of ADI. The metastable austenite appears in the shape of a large plate in which the martensite is preferentially formed. The appearance of martensite can be suppressed at the time when retained austenite remains stable, which is of benefit to the continuity and homogeneity of austenite net.