Latitude Determination and Error Analysis for Stationary SINS in Unknow-Position Condition.

The initial geographic latitude information is the key to the self-alignment of the strapdown inertial navigation system (SINS), but how to determine the latitude when the latitude cannot be obtained directly or in a short time? The latitude determination (LD) methods are introduced, including magnitude method, geometric method, and analytical methods 1 and 2, to solve this situation only by the output of the SINS itself. Simulation and experimental test results validate the efficiency of these LD methods. In order to improve the accuracy of the LD, the error of the LD method is derived through comparative analysis. Based on the relationship between LD error and inertial measurement unit (IMU) bias. Partial bias estimation method is introduced and executed during latitude determination. After compensating the estimated IMU bias, the accuracy of the LD will be further improved. Latitude errors are also affected by the latitude where SINS is located. Comprehensive simulation and experimental tests verify the effectiveness of the method. The IMU determined latitude can not only be used to achieve the self-alignment of the SINS, but also to correct the navigation latitude of the long-term SINS, thereby improving the autonomy and positioning accuracy of the navigation system.